concrete transit mixer

Concrete Transit Mixer For Sale

concrete transit mixer
Concrete transit mixer has an affordable price

Transit concrete mixers are made to transport and mix concrete up to the construction site. Concrete loading, mixing and discharging are done from rear side of this machine. Raw materials usually are sand, water, gravel, aggregate and cement, etc. It seems like a mobile concrete mixer, which can mix concrete and can move with the transfer of construction sites. And also it is like a concrete mixer pump, because it can mix and transport concrete mixture. In addition, it can be used in dry mix concrete plant as the mixing engine, we all know that dry mix concrete batching plant has no mixing engine, which needs a lot of concrete with general quality, therefore, concrete transport truck is an ideal choice for this batching plant, which has advantages of easy movement, high efficiency and stable performance, etc. When the truck moved, the mixer tank will keep rotating on the road to prevent the solidification of concrete. Concrete transit mixer for sale uses Italy concrete pump, German reducer and Japan KYD motors, in a word, our mixer truck is used to mix and transport large volumes of concrete mixture between 3m³ to 16m³ for use on a building site. Capacity of concrete truck is 3m³, 4m³, 6m³, 8m³, 9m³, 10m³, 12m³ and 14m³.

transit concrete mixer

Six systems of concrete trucks

1. Feeding and discharging system. Feeding and discharging system consist of hopper, discharge chute, active discharge chute and regulation system.

2. Mixing system. Feeding tube, batching plant body, spiral blades and center shaft make up the whole mixing system. The mixer tank is placed on the frame at an angle, one end is supported by bearing pedestal of center shaft, and the other end is supported by two rollers, the outside surface of cylinder is equipped with wave channel.

3. Driving system. We adopt direct hydraulic driving system. Engine power conveyed from the PTO to universal drive shaft, hydraulic pump, hydraulic motor, planetary gear reducer, center of mixing cylinder. For transit mixer truck has no emergency discharge system, to achieve fast concrete discharging, when mixing cylinder stop rotating because hydraulic pump and transmission system are out of order. It is necessary to connect the oil pipeline of hydraulic motor in trouble truck with the oil pump of wrecker truck.

cement drum
Cement drum with many capacities available

4. Water supply system. Water supply system is used to add water into the mixer tank and clean the concrete mixer tank. Add water into the water tank by the water pump, and introduce the air pressure to the water tank and put the pressure water into the agitator, and there is a door in the rear of concrete transit mixer and water will enter into the mixer tank from here. And there is another switch, flexible pipe, nozzle to flush the discharge chute and surface of the whole machine.

5. Electric system. The control voltage is 24 volts.

6. The joystick is located on both back sides of the car, you can manipulate either one of them. Joystick can not only control the revolving speed and direction of the mixer tank, but also can control the revolving speed and feeding.

concrete transit mixer
Concrete transit mixer adopts patent technology

Note on the use of transit concrete mixer

1. It is a must to examine and try the concrete truck for sale before operation, when everything is normal, it can be put into use.

2. Capacities, quality and slumps of conveying concrete should be in accordance with the stipulations.

3. When the truck is parked in an open air, before feeding, should reverse the mixing drum, discharge the ponding and sundries to ensure the quality of concrete mixture.

4. Operator should wear protective equipment when work at discharge hopper, discharge chute, do not approach the hopper and mixing mouth, do not peek inside, or touch the rotating mixing drum with hands.

5. When driving on the road, the lengthening chute must be turned over and placed on the unloading chute and hung up securely, to prevent the shake because of mobility and cause injuries and affect the operation of other vehicles.

6. When the mixer passes through bridges, holes, reservoir and other facilities, especially mini concrete trailer mixer, operator should pay attention to the size of passing height and the weight road can support in case of damaging the truck.

7. Working time of the working unit should less than 8 hours.

transit concrete mixer

8. when the good are delivered, if the moisture is found to evaporate, slumps is lower and couldn’t meet the requirement of users, should add the water into mixing drum properly and then, rotate 30 revolutions at the speed of 12-14 revolutions per minute and discharge.

9. During the process of idle running and concrete transportation, concrete drum can’t stop rotating in case of local damage of roller table and roller as well as generating segregation.

10. The water tank should be filled up frequently for emergencies. Before adding water to the water tank, operator must open the exhaust valve and let the air out of the tank, after supplying the water by air inflation should close the air reservoir. It should be noted that water should be pressurized during the water supply, don’t pressurize when driving on the road.

11. When park the ready mix concrete trucks for sale, there should be no water in water tank and water supply system.

12. Whether the discharge chute and lengthening chute need to be used together are determined by the requirements of the specific position.

13. When the truck is full of concrete and rotates clockwise, if rotates anticlockwise, should operate the hand lever and stabilize the corotation and then operate the hand lever, make it rotate anticlockwise. It is forbidden that operate the hand lever and force it to rotate anticlockwise when it is rotating clockwise.

Specifications

Mixing drum parameter High quality wear-resistance steel High quality wear-resistance steel
Model:Q345 Model:Q345
Drum body thickness: 4mm, End cover thickness:6mm Drum body thickness: 5mm, End cover thickness:6mm
Agitating capacity 6M3 8M3
Drum overall dimension(with frame) 5700*2500*2550mm 6600*2500*2675mm
Charging rate ≥3 m3/min ≥3 m3/min
Top feed hopper dimension ≥650 mm ≥650 mm
Discharging rate ≥2 m3/min ≥2 m3/min
Residual rate ≤0.5% ≤0.5%
Water supply Baric water supply system Baric water supply system
Water tank capacity 450L 450L
Radiator 18L 18L
Reduction gear PMB7Ysp Reducer, Italy technology PMB7Ysp Reducer, Italy technology
Hydraulic pump Eaton 54 America brand Eaton 54 America brand
Hydraulic motor Eaton 54 America brand Eaton 54 America brand
Accessory Tool box Tool box
Mixing drum parameter High quality wear-resistance steel High quality wear-resistance steel
Model:Q345 Model:Q345
Drum body thickness: 5mm, End cover thickness:6mm Drum body thickness: 5mm, End cover thickness:6mm
Agitating capacity 10M3 12M3
Drum overall dimension(with frame) 7100*2500*2730mm 7600*2500*2850mm
Charging rate ≥3 m3/min ≥3 m3/min
Top feed hopper dimension ≥650 mm ≥650 mm
Discharging rate ≥2 m3/min ≥2 m3/min
Residual rate ≤0.5% ≤0.5%
Water supply Baric water supply system Baric water supply system
Water tank capacity 450L 450L
Radiator 18L 18L
Reduction gear PMB7Ysp Reducer, Italy technology PMB7Ysp Reducer, Italy technology
Hydraulic pump Eaton 54 America brand Eaton 54 America brand
Hydraulic motor Eaton 54 America brand Eaton 54 America brand
Accessory Tool box Tool box

Concrete transit mixer price

We are the top concrete machine manufacturer with more than 30 years’ history, and you can see our products in many countries, such as, Algeria, Pakistan, Australia, Trinidad, Russia, Indonesia, Fiji, Karachi, Maldives, Philippine and so on. One of the most fundamental reasons customers would like to choose our products is we have a competitive price, in addition, we can’t give you the accurate price of our agitator truck, for we have to customize a perfect machine according to your requirement.

The last is concrete transit mixer specifications. If you are prone to buy this type machine, Please contact us promptly!

Please feel free to give your inquiry in the form below. We will reply in 24 hours.