

Model: | CLCMT-3 |
Volume: | 3 m3/h |
Chassis: | HOWO; Dongfeng; Shaanxi Auto |
North Pennines; Isuzu; Foton; Delong | |
Feeding Speed: | M3/min≥ 3 |
Unloading Speed: | M3/min≥ 2 |
Discharge reside rate: | %< 0.5 |
Hydraulic Pump: | GMP (Italy) |
Hydraulic motor: | Japan KYD |
Decelerator/Reducer: | GMP (Italy) |
Warranty: | 12 months, from the date of supply |
Delivery time: | Within 15 work days after receiving the payment |

Model: | CLCMT-4 |
Volume: | 4 m3/h |
Chassis: | HOWO; Dongfeng; Shaanxi Auto |
North Pennines; Isuzu; Foton; Delong | |
Feeding Speed: | M3/min≥ 3 |
Unloading Speed: | M3/min≥ 2 |
Discharge reside rate: | %< 0.5 |
Hydraulic Pump: | GMP (Italy) |
Hydraulic motor: | Japan KYD |
Decelerator/Reducer: | GMP (Italy) |
Warranty: | 12 months, from the date of supply |
Delivery time: | Within 15 work days after receiving the payment |

Model: | CLCMT-5 |
Volume: | 5m3/h |
Chassis: | HOWO; Dongfeng; Shaanxi Auto |
North Pennines; Isuzu; Foton; Delong | |
Feeding Speed: | M3/min≥ 3 |
Unloading Speed: | M3/min≥ 2 |
Discharge reside rate: | %< 0.5 |
Hydraulic Pump: | GMP (Italy) |
Hydraulic motor: | Japan KYD |
Decelerator/Reducer: | GMP (Italy) |
Warranty: | 12 months, from the date of supply |
Delivery time: | Within 15 work days after receiving the payment |

Model: | CLCMT-6 |
Agitating capacity: | 6 m3 |
Chassis: | HOWO; Dongfeng; Shaanxi Auto |
North Pennines; Isuzu; Foton; Delong | |
Mixer drum parameter: | adopt Q345 high-quality wear-resistance material |
Drum body thickness: | 4mm |
Drum overall dimension(with frame) | 5700*2500*2550mm |
Water supply: | Baric water supply system |
Reduction gear: | PMB7Ysp Reducer, Italy technology |
Hydraulic pump: | Eaton 54 America brand |
Hydraulic motor: | Eaton 54 America brand |
Residual rate | ≤0.5% |

Operation mode of concrete trailer mixer
1. Mixing process. Switch the operating handle to “agitate”, lift the transmission shaft of mixer cab up to the position of locking the control handle;

2. Unlocking. In the place of “mixed-feeding” of control handle, such as control the stop and pushover in the cab, and push of the handle, you can unlock the handle;
3. Pre-mixed cement. Switch the handle from “low” to “high” and it should be locked in a specific task discharge slot;
4. The stop of mixing drum. Switch the operation handle to “neutral”;
Attention please: It is necessary to stop for a while in the position of “neutral” no matter you want to feed or discharge materials, and move the front suspension cylinder to the state of the next operation.

Model: | CLCMT-8 |
Agitating capacity: | 8m3 |
Chassis: | HOWO; Dongfeng; Shaanxi Auto |
North Pennines; Isuzu; Foton; Delong | |
Mixer drum parameter: | adopt Q345 high-quality wear-resistance material |
Drum overall dimension(with frame) | 6600*2500*2675mm |
Drum body thickness: | 5mm |
Water supply: | Baric water supply system |
Charging rate | ≥3 m3/min |
Top feed hopper dimension | ≥650 mm |
Discharging rate | ≥2 m3/min |
Residual rate | ≤0.5% |

Model: | CLCMT-10 |
Agitating capacity: | 10m3 |
Chassis: | HOWO; Dongfeng; Shaanxi Auto |
North Pennines; Isuzu; Foton; Delong | |
Mixer drum parameter: | adopt Q345 high-quality wear-resistance material |
Drum overall dimension(with frame) | 7100*2500*2730mm |
Drum body thickness: | 5mm |
Water supply: | Baric water supply system |
Charging rate | ≥3 m3/min |
Residual rate | ≤0.5% |
Reduction gear: | PMB7Ysp Reducer, Italy technology |
Hydraulic pump: | Eaton 54 America brand |
Hydraulic motor: | Eaton 54 America brand |

Model: | CLCMT-12 |
Agitating capacity: | 12m3 |
Chassis: | HOWO; Dongfeng; Shaanxi Auto |
North Pennines; Isuzu; Foton; Delong | |
Mixer drum parameter: | adopt Q345 high-quality wear-resistance material |
Drum overall dimension(with frame) | 7600*2500*2850mm |
Drum body thickness: | 5mm |
Water supply: | Baric water supply system |
Charging rate | ≥3 m3/min |
Residual rate | ≤0.5% |
Reduction gear: | PMB7Ysp Reducer, Italy technology |
Hydraulic pump: | Eaton 54 America brand |
Hydraulic motor: | Eaton 54 America brand |

Model: | CLCMT-14 |
Volume: | 14m3/h |
Chassis: | HOWO; Dongfeng; Shaanxi Auto |
North Pennines; Isuzu; Foton; Delong | |
Feeding Speed: | M3/min≥ 3 |
Unloading Speed: | M3/min≥ 2 |
Discharge reside rate: | %< 0.5 |
Hydraulic Pump: | GMP (Italy) |
Hydraulic motor: | Japan KYD |
Decelerator/Reducer: | GMP (Italy) |
Warranty: | 12 months, from the date of supply |
Delivery time: | Within 15 work days after receiving the payment |
Specifications of concrete mixer trailer
Item | CLCMT-14 | CLCMT-12 | CLCMT-10 | CLCMT-9 | CLCMT-6 | CLCMT-4 | CLCMT-3 | |
Volume(m3) | 14 | 12 | 10 | 9 | 6 | 4 | 3 | |
Chassis model | Dongfeng,HOWO(Sinotruk), Shaanxi Auto, North Pennines, Isuzu, Foton,Delong | |||||||
Feeding speed | M3/min≥ 3 | |||||||
Unloading speed | M3/min≥ 2 | |||||||
Discharge reside rate | %< 0.5 | |||||||
Water supply model | Air pressure water supply | |||||||
Delivery time | Within 15 work days after receiving the payment | |||||||
Warranty | 12 months, from the date of supply. | |||||||
Remarks | Hydraulic Pump& motor: GMP (Italy) | |||||||
Decelerator: GMP (Italy) |
The reason of the noise in operating trailer concrete mixer
Mechanical noise
1. Feeding. When the mixing system send pebble, sand, cement and water to the conical mixing drum according to a certain proportion, the friction and impact between sand and pebble, between gravels and cylinder wall cause large area vibration of the cylinder wall and produce the noise.
2. Mixing. When the pebble, sand and water enter into the mixing drum, the noise is the biggest, when add the cement, noise will be lower.
3. Power transmission. The noise generated by friction between belt and belt pulley, between the gears due to the uneven contact surfaces during rolling process and sliding process.

Motor noise
Motor noise is relatively smaller than the noise of mechanical noise. Concrete mixers are usually installed in the open air, this trailer cement mixer has no sound insulation measures, its noise can spread out far beyond a hundred meters. Meanwhile, the corrosion and less lubrication of the transmission parts increase the noise.
Ways to reduce the noise of cement mixer trailer
1. Clean and change the filter element timely;
2. Change low viscosity hydraulic oil;
3. Timely replenishing the same label hydraulic oil;
4. Check and tighten intake pipeline and avoid it to inhale the air;
5. Reinforce the rack;
6. Clean out the residual cement;
In addition, we set up soundproof room, which is convenient to install, move, assembly and disassembly.
Detailed parts of concrete mixer trailer
Quality steel
Hydraulic system
Spiral blades
Bus baking varnish
Curve blades
Cooling system
Unique performance of concrete mixer on trailer for sale
1. Power assembly. Brand diesel unit, special method of flexible coupling, less noise, stable and reliable power output. Imported hydraulic system with high quality and superior performance;
hydraulic system



2. Travelling mechanism. Adopt rectangular tube unibody construction, which is applicable to a variety of traction forms. Travelling mechanism of cement mixer trailer uses three-axis twin-tube mixing tank, which can achieve safe and stable driving;
3. Mixer tank. 14m³ mixing capacity comply with the national regulations; high strength steel tank, patent blades, not only prolongs the lifespan of tank body, but also effectively improve the mixing quality of concrete mixture;

4. Control device. One-piece flexible shaft control, structure is compact and it is easy to operate;
5. Water supply system. A large volume of water tank, independent air chamber, air pressure water supply, it is very secure and reliable and will not influence the braking system of the whole concrete mixer trailer.

Necessary precautions of ready mix concrete trailer in Summer
Due to the high surface temperature, air pressure inside the tyre is unstable, overspeeding or overloading of vehicles is the main cause of the explosion of vehicles on highways. The prevention of detonation should start from the following four aspects.
1. It is necessary to pay attention to the maintenance of tyres. Should check whether the tyre is damaged or scratched, whether there is risehigh caused by disconnection, should change the position of tyres;
2. Often check the air pressure of the tyres and keep it within the standard range. In addition, filling the tyres with nitrogen is beneficial to keep the tyre pressure stable and reduce the rate of detonation;
3. Pay attention to the tyre temperature. Do not cool the tyres by letting tyres down or splashing waters on them. You should park your cement mixer trailer for salein the shade and let the tyres cool down naturally;
4. Avoid using retread tyres.
Ten precautions of concrete mixer on trailer in Winter maintenance
1. Should change engine oil timely not only add the oil;
2. Do not add cold water suddenly when the water is boiled in the water tank;
3. Bolts cannot be screwed too tight;
4. The piston can not be heated by the open fire;
5. Do not polish the bearing bush with emery cloth;
6. Butter should not be daubed, do not grease the cylinder liner and tyre nut;
7. Cylinder clearance should be measured accurately;
8. The tyre pressure should not be too high;
9. Should regularly check travel allowance up;
10. Should match the cylinder sleeve and piston and then install them.
About concrete trailer price
As for the price, we can’t give you the specific figure, because what we previously mentioned in this page is standard machine, as long as you place an order for this machine, we will customize a unique concrete mixing trailer according to your construction condition.
About us
There are many concrete mixer trailer manufacturers, and we are the leading part in China, we have many types those machines for your selection, such as trailer mounted concrete mixers, mini type, small type, etc. Among them, 1 yard concrete mixer trailer for sale has a good sale volume, moreover, we have small concrete mixer truck, truck mounted concrete mixer, ready mix concrete trucks for sale, and self loading mobile concrete mixer, etc, if you are interested in them, we will give you the most affordable price.